e l e c t r o n i c s i n c . 10base-t pc card module with enhanced cma and resistor network tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? optimized for smc 91c94 chip ? recommended for national, at&t phy chips ? robust construction allows for ir/vp processes ? complies with or exceeds ieee 802.3, 10base-t standards schematic EPE6133AG product performance is limited to specified parameters. data is subject to chan g e without prior notice. package electrical parameters @ 25 c unless otherwise specified dimensions are in inches /mm .010 /.25 cse6133ag rev. c 5/6/03 ? isolation : meets or exceeds 802.3 ieee requirements ? characteristic filter impedance : 100 ? ? ? referenced to the filter output @ 5 mhz for filter only, excluding resistor network ? common mode rejection (db min.) insertion loss (db max.) 1-10 mhz -1/-1 xmit/rcv return loss (db min.) 5-10 mhz -25/-25 xmit/rcv @ 25 mhz -15/-11 xmit/rcv @ 100 mhz xmit/rcv -30/-30 @ 200 mhz xmit/rcv -20/-20 @ 30 mhz -25/-15 xmit/rcv cut-off frequency (mhz) 1.0 mhz 17/17 xmit/rcv @ 50 mhz xmit/rcv -30/-30 crosstalk (db min.) -30/-30 1-10 mhz xmit/rcv attenuation (db min.) @ 20 mhz -7/-5 xmit/rcv @ 40 mhz -30/-25 xmit/rcv differential filter isolation common mode filter 7 6 5 4 68.1 ? 68.1 ? 274 ? 274 ? 806 ? 8 9 10 chip side cable side transmit channel receive channel 49.9 ? 13 3 1 14 49.9 ? 2 differential filter isolation common mode filter 12 chip side cable side .670 (17.02) .035 (.889) 0-8 .085 (2.16) pad layout .700 (17.78) .030 (.762) .790 (20.07) .520 (13.21) pca EPE6133AG date code pin 1 i.d. .017/.022 (.432/.559) .097/.103 (2.46/2.62) .003/.010 (.076/.254) .074/.084 (1.88/2.13) .595/.605 (15.11/15.37) .200 (5.08) .095 (2.41) .008/.013 (.203/.330) .100 (2.54)
|
